Copper Tube Heat Exchangers Archives - Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Air Compressor Intercooler in Saudi Arabia

Overview: Air compressor intercoolers are the most common type, both in factory forced induction cars and aftermarket. They are technically simple, rugged and reliable. An air/air intercooler consists of a tube and fin radiator. The induction air passes through thin rectangular cross-section tubes that are stacked on top of the other. Often...

Air Cooled Steam Condenser in Coimbatore

Overview: Air Cooled steam Condensers directly condense exhaust steam from the steam turbine and return condensate to the boiler without water loss. They are frequently used in electrical power plants and waste to energy plants of all sizes. This constitutes the largest direct air-cooled steam condenser installation and, therefore, the largest...

Generator Heat Exchanger:

Overview: Generator heat exchangers are understands the degradation of steam generator heat exchanger tubing, both mechanical and corrosion modes, which has resulted in extensive repairs and the replacements around the world. The variety of degradation modes challenges the integrity of tubing and, therefore, the stations’ reliability. Inspection...

Air Cooled Refrigeration

Overview: Air cooled refrigeration system by using evaporation cooled air condenser. Amelioration performance dun system frigorifique refried par air condenser Adair refried par evaporation. An evaporative cooler was built and coupled to the existing air cooled refrigeration system of a split-air-conditioner in order to measure its effect on the...

Air Cooled Heat Exchangers

Introduction: Air cooled heat exchangers are water shortage and increasing costs, together with more recent concerns about water pollution and cooling tower plumes, have greatly reduced industry’s use of water cooled heat exchangers. Consequently, when further heat integration within the plant is not possible, these are now usual to reject...

Tube Insert Heat Exchangers

Introduction: Tube inserts heat exchangers are useful tools that improve tube side performance in heat exchangers. Inserts are used for applications in which tube side heat transfer is thermally limiting and an increase in pressure drop is allowed. The best insert type and design for a particular application depends on flow conditions and fluid...

Twisted Tube Heat Exchangers

Introduction: Twisted Tube Heat Exchangers are solved them with a revolutionary tube shape and bundle construction. The result is better performance than ever before. Hundreds of twisted tube exchangers have been operated under a wide variety of field conditions. Over the years, its bundle technology has proven to be more efficient, reliable and...

Air Cooled Condenser in Kanyakumari

Air Cooled Condenser Introduction: Air Cooled Condenser (ACC) are in those arid regions where water is a scarce commodity or in countries where stringent environmental legislation does not allow the use of water, dry Cooling becomes the smart choice. Its technology does not need water to condense the process fluid. In this system, exhaust steam...

Tube Enhancement Heat Exchanger

Introduction: Tube enhancement heat exchanger were initially developed to use plain (or smooth) heat transfer surfaces. An Enhanced tube heat exchangers surface has a special surface geometry that provides a higher thermal performance, per unit base surface area than a plain surface. This work presents information of an experimental design on the...

Air Compressor Aftercooler heat Exchanger

Introduction: Air Compressor Aftercooler heat Exchanger is for cooling the discharge from a air compressor. They use either air or water and are an effective means of removing moisture from compressed air. After coolers control the amount of water vapor in a compressed air system by condensing the water vapor into liquid form. In a […]

Dummy Load Heat Exchangers:

Introduction: Dummy Load Heat Exchangers include a resistive sodium nitrite resistive load directed by insulating tubes to flow in the load. The cooling circuit includes a primary circuit having inlet and outlet thermistors, and a secondary cooling circuit coupled thereto by a liquid to liquid heat exchanger. In the control circuit, the thermistors...

Copper Tube Heat Exchangers

Introduction: Copper Tube Heat Exchangers are devices that transfer heat in order to achieve desired heating or cooling. An important design aspect of heat exchanger technology is the selection of appropriate materials to conduct and transfer heat fast and efficiently. Copper tube heat exchangers are many desirable properties for thermally...

Coil Gavin Heat Exchangers:

Introduction : Coil Gavin Heat Exchangers are constructed using circular layers of helically corrugated tubes placed inside a light compact shell. The fluid in each layer flows in the opposite direction to the layer surrounding it, producing a criss-cross pattern. The large number of closely packed tubes creates a significant heat transfer surface...

Low Finned Tube Heat Exchangers

Introduction: Low Finned Tube Heat Exchangers consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Low Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat transfer […]

Air Blast Heat Exchangers

Introduction: Air blast heat exchangers are also called forced draft oil cooler. This is because the cooling in done by external fan. Here the oil is passed thru radiator & behind the radiator there will be fan which blows over the radiator thus cooling the oil. Radiators are made up of cooper tube with aluminum […]

Drum Boiler Heat Exchangers

Introduction: Drum boiler heat exchangers are a unit which is rated at a certain temperature and pressure to force the boiler feed water into the vapour phase (steam). As the vapour phase is formed the liquid level in the drum decreases. It is important to maintain control of the liquid level in the boiler drum […]

Heat Exchangers Overview

Introduction Of Heat Exchangers : Heat exchanger is a device designed to efficiently transfer or “exchange” heat from one matter to another. When a fluid is used to transfer heat, the fluid could be a liquid, such as water or oil, or could be moving air. The most well known type of heat exchanger is […]

Bottle Shape Cooling Tower in Vellore, Tamil Nadu

Bottle Shape Cooling Tower About Tipo offer Bottle Shape Cooling Tower that is required for cooling application in numerous industries. In the assembly of Bottle Shaped Cooling Tower, high grade materials are used that ensure its efficient functioning and reliability. The gamut of Bottle Shaped Cooling Tower is available in numerous sizes and...

Square Shape Cooling Towers in Dharmapuri, Tamilnadu

Square Shape Cooling Towers OVERVIEW OF SQUARE SHAPE COOLING TOWERS Tipo heat exchangers covers a never ending range of square/rectangular cooling tower. The term” never ending” is quoted here because of the modular attribute of the series. These Square shape cooling towers can be made available in any capacity and of any size. The series...

Square Shape Cooling Towers in Chennai, Tamilnadu

Square Shape Cooling Towers OVERVIEW OF SQUARE SHAPE COOLING TOWERS Tipo heat exchangers covers a never ending range of square/rectangular cooling tower. The term” never ending” is quoted here because of the modular attribute of the series. These Square shape cooling towers can be made available in any capacity and of any size. The series...

Coil Cooling Tower Coimbatore Tamilnadu

Coil Cooling Tower Coimbatore Introduction of Coil Cooling Tower Tipo Coil Cooling Tower is equipment used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is driven by an Electric Motor. Applying dry cooling...

Coil Cooling Tower Maharashtra

Coil Cooling Towers Introduction of Coil Cooling Tower Tipo Coil Cooling Tower is equipment used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is driven by an Electric Motor. Applying Coil/dry cooling means saving...

Fanless Cooling Towers

Fanless Cooling Towers does not contain any fan or fill used to cool the water and so it is called fanless cooling towers and fill less cooling tower. The wooden louvers are used as the side wall of the cooling tower to restrict the water spillage. The outside wind passage enters into the cooling tower […]

Square Shape Cooling Tower

The Square Shape Cooling Tower is of the design: -Vertical Induced Draft Counter Flow, with a uniform distribution of water and an optimal transfer of heat -These are used by all large industries to cool the water that has undergone recycling -The installation of these products can be done independent of the direction of wind […]

Bottle Shape Cooling Towers

Bottle Shape Cooling Towers are also referred as Round Type Cooling Tower in the industry because of the bottle like shape. The robust line of round bottle shape cooling towers is manufactured in the range of 5 TR to 600 TR capacities. The series complies the concept of induced draft and counter flow functioning. The […]

Evaporative Cooling Towers

Product Description Design: Evaporative (FRP) Cooling towers are of vertical induced draft counter flow design with uniform water distribution and optimal heat transfer. Towers can be installed independent of wind direction. The tower casing is made from tough fiberglass and has sufficient strength to withstand high velocities and vibrations. The...

Dry Cooling Towers

Types of Cooling Towers After many years of development of this technology, cooling towers are available in different types and sizes. Each of these is applicable in a certain load configuration, the reason it is important to outline the options available. Note that despite the different designs, the basic function remains as that of dissipating...

Pultruded FRP Cooling Towers

TIPO offers field erected Pultruded FRP cooling towers. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardwares. Properties of Pultruded FRP gives the cooling tower distinct advantages over other material of construction like concrete or timber. Engineering at TIPO...

Wooden Cooling Towers

This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected Geared Motor with low R.P.M and higher air discharge capacities. The Wooden Cooling Towers structural and supporting sections are HDG Steel, fastened with SS fasteners, and suited for hot, harsh and...

Cooling Coil Heat Exchangers Manufacture in South India

The goal of a cooling coil heat exchangers is to cool and/or dehumidify an air stream by passing the air stream over a finned set of tubes that have cooler glycol (or similar liquid) flowing through them. In principle the exact same physical heat exchanger can be used to heat an air stream. The cooling […]

M	T	W	T	F	S	S
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30

Tags: Copper Tube Heat Exchangers