FRP Cooling Tower
1. Designed for maximum service life dependability and performance
2. Readily adoptable for industrial processes, DG sets & Air conditioning
3. Designed for unifom water distribution and optimal heat transfer
4. Consumes minimum power due to high efficiency of Axial flow fan sets.
Pultruded Cooling Towers & Parts
The Structure of Cooling tower is fabricated of Pultruted FRP profile which are free from corrosion. The whole cooling tower is fabricated in pieces & bolted together to facilitate easy shifting
The tower casing is made of FRP which encloses the surface area serves to isolate air stream, which passes over the surface area.The casing shape is of curtain type which reduce frictional resistance of air and aid air flow pattern.
The sump serves the purposes of collecting the water descending from the surface area and channelling it to the suction point. Further the sump also acts as a reservoir of water. The sump is also made of FRP and has similar characteristics as the casing
The distribution box serve the pupose of channeling the hot water to spread all over the fill area evenly to provide maximum efficiency of the cooling tower
The PVC Flower nozzles are used in hot water basin to sprinkler water all over the splash bar area & operates under gravity
Louvers are in FRP are provided to prevent contaminants like leaves, birds etc. entering the cooling tower & to facilitate the air entry in to the tower.
Hot water Basin
In cross flow induced draught cooling tower the FRP Hot Water Basin is used to distribute the water evenly over the cross section of the tower.
Header & Sub Header Pipes
In counter flow induced draught cooling tower the PVC header pipes & sub-header pipes are used to distribute the water evenly over the cross section of the tower.
The PVC Ring type nozzles are used in sub-header pipes to sprinkler water all over the fill area & operates under gravity