Tags: cooling tower coatings

  • Tag:

Water To Air Heat Exchangers

  Water To Air Heat Exchangers Water to air heat exchangers are devices used to transfer process heat from water into the air. Water is typically used in liquid to air heat exchangers because it is readily available and has excellent conductive properties; however liquids such as a water-glycol solution, steam, or a refrigerant may […]

Liquid Chillers

  Liquid Chillers Liquid chillers are refrigeration systems that chill liquids such as water, oil, brine, alcohol, coolants, chemicals and beverage or food ingredients for industrial applications. Their design and construction are very similar to air conditioners, and they range vastly in size. They may be fabricated as small, localized units...

Absorption Chiller

Absorption chillers have been around for some time, but the true potential of the technology is just now coming to light for manufacturing plants around the world. Most absorption chillers use a type of technology known as co-generation. Co-generation is enabling the by-product of creating one type of energy to transform into a new form […]

Screw Chiller

  Screw Chiller A screw chiller is a liquid chiller that uses two rotating helical screws to provide the needed pressure to drive the vapor-compression refrigeration process. Screw chillers are more compact, quieter and contain fewer parts than their alternatives: reciprocating, centrifugal and absorption chillers. Screw chillers rarely break...

Portable Chillers

  Portable Chillers Portable chillers are relatively small, movable, single pump machines that remove heat from a liquid through a cycle of compression, condensation, and evaporation. The chilled liquid is usually then piped as a coolant to a heat exchanger in order to cool a piece of equipment, a manufacturing process, or a stream of...

Recirculating Chillers

  Recirculating Chillers Recirculating chillers are refrigerated liquid cooling systems that recycle the same refrigerant liquid within a closed loop. They provide precise, continuous duty temperature control by constantly recirculating a coolant through the temperature control unit, reservoir and refrigeration unit by a circulation pump,...

Lab Chillers

  Lab Chillers Chillers are machines that remove heat from a liquid through either a vapor compression or absorption refrigeration cycle. This liquid heat is then circulated through a heat exchanger, allowing the liquid to cool equipment or another process stream, like air or process water. A lab chiller is a specific type of chiller...

Food Processing Chillers

  Food Processing Chillers In the food and beverage industry, industrial sized food processing chillers are used every day to cool food and liquids like dairy products to a specific temperature. These temperatures are necessary to keep products fresh and prevent health risks, but they are also important for businesses like bakeries that need...

Laser Chillers

Laser Chillers Laser chillers are used to remove the heat generated from the heating of different components in a system. The whole idea behind laser cooling is to maintain a precise laser wavelength and higher output efficiency to achieve a desired beam quality and reduce thermal stress on a laser system. A laser chiller is […]

Brewery Chillers

Brewery Chillers Brewery chillers as their name would suggest are used in the process of brewing beer. Typically, this type of chiller is used in the cold crashing and fermentation of beer, and they usually circulate 28°F degree glycol for 33°F degree beer. Most brewery chillers require glycol, which is a food grade anti-freeze, because...

Cooling Tower Design

  Cooling Tower Design GIREESG COOLING TOWERS Directory implements a thorough list of cooling tower design companies and suppliers. Utilize our listing to examine and sort top cooling tower design companies with previews of ads and detailed descriptions of each product. Any cooling tower design company can design, engineer, and manufacture...

ETP Tanks

ETP TANK We manufacture High Performance Heavy Duty Mild Steel Reinforced FRP tanks to meet the High performance for decades. We Manufacture High Performance Heavy duty ACID / ALKALI Proof Lining On existing RCC tank in EFFLUENT TREATMENT PLANT Tanks to meet the High Durability with Superior Corrosion Resistant to all Critical Acidic and Alkaline...

WATER CHILLERS USED

WATER CHILLERS USED                          summer and we all are looking for cool things to drink, to eat, to wear and a cooling ambience around to live in. Water chillers are the major contributors that help cool and condition in the big industrial, commercial as well as the institutional sectors and are used to reduce...

Basic Modes of heat exchangers

BASIC MODES OF HEAT EXCHANGERS Heat transfer occurs when a temperature gradient exists within a system. Thermodynamics states that energy cannot be created or destroyed, only transformed from one state to another and transferred between different media. In basic heat exchange, there are three modes of heat transfer: conduction, convection and...

compressed air dryer

COMPRESSED AIR DRYER Tipo Heat Exchangers are the manufacturers of complete range of Heat less Compressed Air Dryer system (drier) and gas dryer system,These Compressed gas and air dryers (driers) find use in majority of Industrial compressed air system and applications. These air and gas dryer (drier) are also offered for High Pressure gas and...

Cooling Tower Management

FRP COOLING TOWER Cooling towers dissipate heat from recirculating water used to cool chillers, air conditioners, or other process equipment to the ambient air. Heat is rejected to the environment from cooling towers through the process of evaporation. Therefore, by design, cooling towers use significant amounts of water. Overview The thermal...

compressed air dryers

AIR DRYERS A compressed air dryer is used for removing water vapour from compressed air. Compressed air dryers are commonly found in a wide range of industrial and commercial facilities. The process of air compression concentrates atmospheric contaminants, including water vapour. This raises the dew point of the compressed air relative to free...

Double Pipe Heat Exchanger

DOUBLE PIPE HEAT EXCHANGERS The heat exchanger is completed of concentric inside also exterior pipe and the Heat exchangers are used to transfer the energy from one substance to another. Thermal design Calculation Q = UA ?Tlm After determination of the required heat transfer surface area, Other Mechanical Design are made, With reference to Process...

Semi Automatic Water Softening Plant

Semi Automatic Water Softening Plant Semi Automatic Water Softening System. … Softening Plant based on ion exchange process. The hard water passes through the caution resin in the exchange tank, the calcium and magnesium in water will be exchanged, absorb by sodium in the resin to remove calcium, magnesium, carbonate hardness, thus softening...

INLET LOUVRES

AIR INLET LOUVRES FOR COOLING TOWERS PREVENT WATER SPLASH – OUT Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the...

Wet Cooling Tower

Efficient technology for high-performance solutions                    Wet cooling offers an outstanding performance by taking full advantage of the ambient air humidity. Wet cooling, also called evaporative cooling, enables to obtain a re-cooled water temperature at least 20°C lower as compared to a radiator. As turbine output...

Air Receiver Tank

AIR RECEIVER TANK                                     Absolutely essential to any compressed air system, air receiver tanks not only serve as temporary storage, but they also allow your system to perform more efficiently. Because of the immense pressure they contain and because of their importance to an air...

Cooling Tower PVC Fills

COOLING TOWER PVC FILLS We provide PVC Fill is high on demand in the national and international markets. PVC Fill is fabricated using highly advanced technology thus ensuring its supreme quality and durability. Manufactured in accordance with international quality standards, PVC Fill dispatched by us is the best available in the markets....

Drift Eliminator

Drift Eliminator Drift eliminators are designed to capture large water droplets caught in the cooling tower air stream. The eliminators prevent the water droplets and mist from escaping the cooling tower. Cooling Tower Drift eliminators and  drift eliminators are created to pull out droplets of water from the air and lower the loss of processed...

Process heat exchangers

Process Heat Exchangers With over 50 years of experience in the field of Heat Exchange Tipo Heat Exchangers can address and resolve all of your needs in air-cooled heat exchange. Tipo Heat Exchangers designs and manufactures air-cooled heat exchangers (ACHE)- also called air cooler , and finned tubes and can offer their products to chemical,...

Forced  draft  cooling  towers

COOLING TOWERS INTRODUCTION Forced draft cooling towers are specially designed to handle zinc sulphate solutions or highly corrosive liquids. They are equipped with distribution in highly resistant material. The machines and processes of industry, as well as those devoted to human comfort and well being generated tremendous amounts of heat, which...

Cooling tower condenser water

Cooling Tower and Condenser Water Design Part 1: The Refrigeration Cycle Cooling towers are simple mechanisms.  Their operation is based on the natural occurrence of evaporative cooling – something most of us have experienced daily since the first time we got wet and felt a chill. But despite their simplicity, cooling towers play a crucial...

Radiator

For other uses, see Radiator (disambiguation). Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plant or any similar use of such an engine. Internal combustion engines are often cooled by circulating a liquid...

Air Blast Oil Cooler

For fulfilling the needs of the diverse industrial sectors, we are engaged in manufacturing, exporting and supplying our clients a broad array of Air Blast Oil Cooler. This oil cooler is manufactured in synchronization with predefined industry standards with the help of advanced technique using optimal quality components under proper experts’...

Direct-Contact Heat Exchangers

ABOUT DIRECT-CONTACT HEAT EXCHANGERS: In a Direct-Contact Heat Exchangers, two fluid streams come into direct contact, exchange heat, and are then separated. Common applications of a direct-contact exchanger involve mass transfer in addition to heat transfer, such as in evaporative cooling and rectification; applications involving only sensible...

Field Erected Pultruded Frp Cooling Towers

Field Erected Pultruded FRP Cooling Towers Tipo Heat Exchangers made of Pultruded Fiberglass are the best solution in Worst Industrial environment. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardware. Pultruded Fiberglass Reinforced Polyester ( FRP ) is becoming...

Water Cooled Chiller

Tipo Heat Exchangers range of water cooled water chiller represents the ideal solution for the water cooling of Industrial process Water Systems & designed to facilitate quick installation. We offer water cooled chilled water plants in sizes ranging from 5-Tr to 150 -Tr . These water chillers system find application in brine chilling, glycol...

RCC Cooling Tower

RCC Cooling Towers We are manufacturing Induced draft Cooling Tower in RCC Construction also both in Cross Flow and Counter Flow design. Since the structure of Cooling Tower is complete with RCC, the tower life will be more than timber as well as FRP. All other internal fills and Drift Eliminators are PVC / TIMBER […]

U-Tube Heat Exchangers

U  – Tube Heat Exchangers Shell and tube heat exchanger As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the […]

Condensers

A properly designed Graham Condenser between the process and vacuum producing equipment will yield significant advantages. The use of a process vacuum condenser can permit significant reduction in the size of the vacuum producing equipment. A condenser can recover for reuse valuable product that’s carried from the process with non-condensable...

Remote Sump Tanks

Remote Sump Tanks  Remote sump tanks can be added to cooling tower,  closed circuit cooling tower, or evaporative condenser systems. Remote sump tanks are often installed indoors in a heated space to prevent freezing of the recirculating water during cold weather operation.  Because the recirculating water is quickly drained from the unit when...

Maximum Entering Water Temperature

Maximum Entering Water Temperature As previously stated, typical HVAC conditions call for an entering water temperature of approximately 95ºF (35.0ºC). All BAC Cooling Towers are capable of withstanding temperatures of at least 120ºF (48.9ºC) with standard fill materials. For applications where the entering water temperature exceeds 120ºF...

Maintenance of cooling towers

                                                           Cooling Tower A cooling tower extracts heat from water by evaporation.  In an evaporative cooling tower, a small portion of the water being cooled is allowed to evaporate into a moving air stream to provide significant cooling to...

COOLING TOWER TERMS

COOLING TOWER TERMS Cooling Range The difference in temperature between the hot water entering the tower and the cold water leaving the tower is the cooling range. Approach The difference between the temperature of the cold water leaving the tower and the wet bulb temperature of the air is known as the approach Wet bulb […]

Closed circuit Cooling Towers

Closed circuit Cooling Towers Closed circuit Cooling Towers are hybrids that pass the working fluids through a tube bundle, upon which clean water is sprayer and a fan-induced draft applied. The resulting heat transfer. performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protection […]

Chillers and Chiller Systems

Chillers and Chiller Systems The Modern Industrial Chiller is basically a cooling system that removes heat from one element (water/glycol/air) and deposits into another (ambient air or water). The standard design is a system that cools 60° F water (water/glycol, or air) to 50° F and deposits the heat into the ambient air at 95° […]

Air Cooled Heat Exchanger

The right heat exchanger (HX) requires some knowledge of the different heat exchanger types, as well as the environment in which the unit must operate. Typically in the manufacturing industry, several differing types of heat exchangers are used for just the one process or system to derive the final product. For example, a kettle HX […]

Counter Flow Cooling Tower

Counter Flow Cooling Tower Cooling Tower Selection: Cooling towers are designed and manufactured in many sizes and configurations. Recognizing and understanding the different configurations and advantages is essential for specifying the most cost effective solution for the end user. The purpose of this bulletin is to highlight the differences...
1 4 5 6