Basic Modes of heat exchangers Archives - Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Surface Codensers

Surface Condenser Introduction Tipo surface condenser mainly consists of a cast iron shell. The shell is cylindrical in shape and closed at both end to form a water box. A tube plate is located between each cover head and the shell. A number of water tubes are fixed to the tube plates. The shell is […]

Dynamic scraped surface heat exchanger Fin Cooler

Dynamic scraped surface heat exchanger Fin Cooler Mechanical Compression : – During the compression cycle, the refrigerant passes through four major components within the chiller: the evaporator, the compressor, the condenser, and a flow-metering device such as an expansion valve. The evaporator is the low-temperature (cooling) side of...

Copper Heat Exchanger

Copper Heat Exchanger Copper heat exchangers are more efficient than shell and tube exchangers for low flow rates. Due to their simple construction they are low in price and easy to clean on the shell side. These copper heat exchanger tubes are normally supplied in straight length in annealed & half hard temper. Copper […]

Plate Fin Heat Exchanger

Plate Fin Heat Exchanger Our aluminium plate-fin heat exchangers (PFHEs) are key components in many process plants. Their compact footprint helps save space and costs in a wide range of facilities, including air separation plants, petrochemical and gas treatment plants as well as natural gas and helium liquefaction plants. Our PFHEs are brazed in...

Vertical Shell and Tube Heat Exchanger

Vertical Shell and Tube Heat Exchanger Vertical Shell and tube heat exchangers consist of a series of tubes. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required. One set of these tubes contains the fluid […]

Sanitary Heat Exchangers

Sanitary Heat Exchangers Pharmaceutical & Food Grade Hea t Exchangers A new series of heat exchangers designed and engineered for the pharmaceutical and food industries and suitable all applications requiring compliance with FDA and 3A specifications. The unique construction of the S-Line Sanitary heat exchangers prevents cross-contamination...

Recuperative Heat Exchangers

Recuperative Heat Exchangers A regenerative heat exchanger, or more commonly a regenerator, is a type of heat exchanger where heat from the hot fluid is intermittently stored in a thermal storage medium before it is transferred to the cold fluid. Abstract A recuperative heat...