Copper Heat Exchanger


Copper heat exchangers are more efficient than shell and tube exchangers for low flow rates. Due to their simple construction they are low in price and easy to clean on the shell side.

These copper heat exchanger tubes are normally supplied in straight length in annealed & half hard temper. Copper tubes are artificial to special requirements as to dimensional tolerances, finish and tempers for use in condensers and heat exchangers.

The copper tubes shaped by are metal industries not only have the stiff tolerances but also have the most dependable dimensions throughout the tube length. The tube surface is clean both inside and outside with no caustic stains.

The copper tubes produced by are metal industries are suitable to transfer heat in a wide variety of operating conditions and to refuse to accept decay for the longest period of time possible under the harshest operating circumstances.

Coils are made in different diameters using tubes of different bores.

Their thermal efficiency approximates that of a true countercurrent flow type exchanger. Condenserors are used for condensation of vapours and cooling of liquids. Condensers are made by fusing number of parallel coils in a glass shell.

Copper Heat Exchanger offered comprises quality micro unit heat exchange tube with optimum internal and external wall finish so as to offer optimum functional usage. Further, its spiral ripple construction helps in maintaining original flow state when fluid flows through external and internal tube walls.

Convoluted Copper Heat Exchanger

25 ft of 5/8″ convoluted copper.

9″ OD coil.

1/2″ FPT copper inlet and outlet.

Approximately 24″ in height to the bend for inlet and outlet.

Coils are approximately 9″ in height.

Some of its features include:

  • Double reinforcement finish
  • Reduce heat resistance while improving internal and external heat transfer coefficient
  • All tubes are bright annealing that guarantee smooth surface of the tube
  • All tubes coming inspected by Eddy-current test and hydraulic test to assure of consistent performance