Blog

FRP Cooling Tower

              FRP Cooling Tower

Introduction

Tipo FRP cooling towers in karur are very economically operating  Tower, since there is no fan or electric motor, there is no huge operating or maintenance cost involved in this  Tower and also in Energy efficiency point of view, this is the best Payback Cooling Tower when comparing with other models. FRP Cooling Towers manufactured with Glass reinforced plastic mostly in wind with standing bottle type and square type models. It is a mechanical type Counter Flow Tower. FRP Cooling tower intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top. The water droplets have more direct contact time with air. The wet cooling Towers cooled with the help of evaporating some proportionate quantity of circulating water.

The bottle type tower casing filled with Honeycomb type PVC FILLS. The rotating water distributor sprinkler fixed in the top of the inlet pipeline and the same distributes the hot water evenly over the Honeycomb Fill media. The sprinkler will operate with self-propulsion system

Features of FRP cooling towers:

Easy to maintain
Vertical Air discharge
Reliable, Accessible components
Vertical Air Discharge
Lower operation cost
Efficient drift eliminators
Industrial grade motors
Superior Louver design
Reduce water usage
Motor and fan assembly
Lower water carryover problems
Reduce algae

FRP Casing/Body:

The tower casing has been manufactured from fiberglass reinforced plastic (FRP) so it is also called FRP Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration. The casing is fabricated in segments duly matched at works and aerodynamic contours are achieved for best fan performance.
Specifications of FRP Cooling Tower:

Simply says, in Fan less Cooling Towers the Hot water will be sprayed in the top of the Cooling Tower with spray nozzles into small droplets like mists and the droplets are crossed with the atmospheric wind flow to get the water cooled.

Applications of FRP Cooling Towers:

This model Cooling Towers are water saving and pollution free, safety with environmental protection

Method / Type:Sound free design.
Fanless / Natural
Draft:Since no fan, motor and gear box it is low noise Cooling Tower than any other low noise type Cooling Tower.
Fan Motor Type:Since fan, motor and gear boxes are used, high noise and vibration.

Advantages of FRP Cooling Towers:

Light for transportation and construction
No severe limitations on profile length
Bracing in one piece
No limitation in the water quality
Fire protected

FRP cooling towers of other model cooling towers are due to Fan, Motor, Gear box and Drive shaft and its vibrations. Since these models of Cooling Towers are not having Fan, motor, Gear boxes, this equipment has no trouble-some of noise & vibration.

Images:
FRP Cooling Tower
FRP Cooling Tower