Tipo heat exchangers covers a never ending range of square/rectangular cooling tower.  The term” never ending” is quoted here because of the modular attribute of the series.  These Square shape cooling towers can be made available in any capacity and of any size. The series adopts the fundamentals of induced draft counter flow operation, whereby the heated water enters the cooling tower via the inlet pipes and leaves out after lowering down the temperature. The hot water is splashed through the non clogging splash caps over the fills/packing for increasing the surface area. Simultaneously the outside dry air is induced to the cooling tower with the efforts of cooling tower motor emplaced on the top.  Due to this counter contact of water and air, the evaporation takes place resulting in the temperature drop.  The air inlets are limited to the lower part of the casing walls and the air after going through the functioning area leaves most of the entrained moisture in the new and the effective system of drift eliminators.


The Square Shape Cooling Towers  incorporates a static distribution setup, located above the fill media.  Hot water form the application is circulated to the distribution header from which they are dispersed over the fill media by no. of non-clog static nozzles, fitted to the branch pipe of the main header.  Water when forced ( 1 to 1.5 kg/scm) through the distribution setups is atomized and sprayed over the fill media.  The fan that is coupled directly to the motor draws air across the fill media vertically and in the process takes away the heat from the water. Cold water is collected at the collection sump having the outlet connection through which cold water is circulated to the application.  The spray losses are minimized by using adequate drift eliminators. The distinguishing features of our product are compact design Honey comb type PVC fills, with varying flute sizes, to provide maximum contact surface area and heat transfer surface per unit volume.


  • All structural in HDG Steel
  • PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm
  • TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft
  • Adjustable pitch axial flow, dynamically balanced aluminium fans
  • Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  • All joints fastened with SS fasteners
  • Uniformity in water dispersion through non – clog nozzles
  • Capacities 10TR to 1500TR , in single cell
  • Water flow 5 m3/h to 1000 m3/h, in single cell
Square Shape Cooling Towers
Square Shape Cooling Towers