Treated Timber Cooling Tower

Hot process fluid enters the coil (or tube bundle) from the water intake, and the spray system and fan system are started at the same time. The heat of process fluid undertakes heat transfer via tube walls and is transferred to the spray water running through the outer surface of the tube. The process water […]

In a wet cooling tower (or open circuit cooling tower), the warm water can be cooled to a temperature lower than the ambient air dry-bulb temperature, if the air is relatively dry (see dew point and psychrometrics). As ambient air is drawn past a flow of water, a small portion of the water evaporates, and […]

Wet cooling towers or open-circuit Cooling Tower or evaporative cooling towers operate on the principle of evaporative cooling. The working coolant (usually water) is the evaporated fluid, and is exposed to the elements. Closed circuit cooling towers (also called fluid coolers) pass the working coolant through a large heat exchanger, usually a...

Industrial cooling towers Industrial cooling towers for a power plant Industrial cooling towers for fruit processing Industrial cooling towers can be used to remove heat from various sources such as machinery or heated process material. The primary use of large, industrial cooling towers is to remove the heat absorbed in the circulating cooling...

An HVAC (heating, ventilating, and air conditioning) cooling tower is used to dispose of (“reject”) unwanted heat from a chiller. Liquid-cooled chillers are normally more energy efficient than air-cooled chillers due to heat rejection to tower water at or near wet-bulb temperatures. Air-cooled chillers must reject heat at the higher...

A hyperboloid cooling tower was patented by the Dutch engineers Frederik van Iterson and Gerard Kuypers in the Netherlands on August 16, 1916.[10] The first hyperboloid reinforced concrete cooling towers were built by the Dutch State Mine (DSM) Emma in 1918 in Heerlen.[11] The first ones in the United Kingdom were built in 1924 at […]

Cooling towers originated in the 19th century through the development of condensers for use with the steam engine.[5] Condensers use relatively cool water, via various means, to condense the steam coming out of the cylinders or turbines. This reduces the back pressure, which in turn reduces the steam consumption, and thus the fuel consumption,...

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream, to a lower temperature.[1] Cooling towers may either use the evaporation of water to remove heat and cool the working fluid to near the wet-bulb air temperature or, in the case […]

Crossflow is a design in which the airflow is directed perpendicular to the water flow (see diagram at left). Airflow enters one or more vertical faces of the cooling tower to meet the fill material. Water flows (perpendicular to the air) through the fill by gravity. The air continues through the fill and thus past […]

On 16 August 1916,[22] Frederik van Iterson took out the UK patent (108,863) for Improved Construction of Cooling Towers of Reinforced Concrete.[23] The patent was filed on 9 August 1917, and published on 11 April 1918. In 1918, DSM built the first hyperboloid natural-draft cooling tower at the Staatsmijn Emma, to his design. Hyperboloid (sometimes...

In a wetcooling tower (or open circuit cooling tower), the warm water can be cooled toa temperature lower than the ambient air dry-bulb temperature, if the air isrelatively dry (see dew point and psychrometrics). As ambient air is drawn pasta flow of water, a small portion of the water evaporates, and the energyrequired to evaporate […]