Blog

Round Shaped Cooling Tower

  Round Shape Cooling Tower

About:

Tipo Round shape cooling tower is the circulating water flow that is removed (usually discharged to a drain) in order to maintain the amount of Total Dissolved Solids, other impurities at an acceptably low level. Higher TDS concentration in solution may result from greater cooling tower efficiency. round-shape-cooling-tower-kanchiur. However the higher  the TDS concentration. The water that must be added to the circulating water system in order to compensate for water losses such as evaporation, drift loss, blow-out, blow-down, etc.

Salient Features:

  • All structural in HDG Steel to arrest rust
  • PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm to increase the contact surface area.
  • TE / TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft to assist outdoor applications.
  • Adjustable pitch axial flow, dynamically balanced aluminum fans to improve the air exhaust at minimum power usage.
  • Casings of FRP (Fiber Reinforced Plastics) for durability and strength
  • All joints fastened with SS fasteners to arrest rust
  • Uniformity in water dispersion through rotary sprinkler
  • Capacities 10TR to 1500TR , in single cell
  • Water flow 5 m3/h to 1000 m3/h , in a single cell
  • 360 °C air intake area assist 100% cooling efficiency
  • Delta T (Temperature drop) 4°C to 20°C, in single cell
  • ABS Fills for high temperature applications (80 °C)
  • Being Bottle Shape with stands High Wind Velocity.
  • Eliminators are of special F.R.P. design to reduce carryover to the barest minimum.

Applications:

  • Aluminum die casting m/c
  • Air compressors
  • A/C plant & cold rooms
  • Blow molding M/c
  • Chemical industries
  • Dairy, Citrus and other food processing industries
  • Distilleries and Breweries plants
  • Diesel / Gas Gen-sets & Megawatt Projects
  • Glass Mfg. Plant
  • Herbal, Aromatics & extraction plants
  • Industries heat process
  • Oil refineries
  • Plastic injection molding m/c
  • PVC pipes manufacturing .plant
  • Soap / Cosmetic mfg. industries
  • Steel factory and foundry

Round shape Cooling Tower Capacities

Round shape cooling tower gives 100% cooling efficiencies it’s give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4ºC To30 ºC Availability of Capacities from 5 TR T0 600 TR.

Cooling Tower Maintenance

  • Efficient treatment of water
  • Prevent scale deposits
  • Do way with or clean spray nozzles that get clogged
  • Adequate air flow should be ensured
  • Adequate performance of pump also should be assured

Round shape Cooling Towers Spares

  • PVC Fill                  : A good quality fill and is of long life too.
  • Drift Eliminator : The carry over losses due to moisture drops.
  • Sprinkler               : Due to the even water distribution over the honey comb fills.
Images:
Round Shape Cooling Tower
Round Shape Cooling Towers