Bottle Shape Cooling Towers

The tower design incorporates hot water inlet at the bottom collection sump circulated vertically to the mechanical rotary sprinkler located above the fill media. The inlet water pressure rotate the sprinkler, having extended arm pipes with orifices to disperse water uniformly over the fill media.

The fan directly coupled to the motor, during operations takes away the heat by induced draft mechanism. Air is drawn from the lower air in take area & is induced to travel through the fill media thus taking away the latent heat from the water passing through the fill media. Portion of water evaporated, removes the heat from the remaining water. The warm moist air is drawn through the fan deck is discharged to the atm
osphere. Cold water, collected at the collection sump, is re-circulated to the source.

Round cooling towers are also referred as bottle shape cooling towers in the industry because of the bottle like shape. The robust line of round bottle shape cooling towers is manufactured in the range of 5 TR to 600 TR capacities.

The series complies the concept of induced draft and counter flow functioning. The hot water is circulated in the cooling tower and spreaded over the fills/packing by means of self rotating sprinkler. Concurrently the atmospheric air is drafted through an induced draught fan mounted on the top of the cooling tower. The traveling of air and water in opposite direction makes this principle a counter flow type. An evaporation loss of the water leads to the lowering down of water temperature.

These bottle shape cooling towers are known for their artistic design, elegant shape, excellent features, Toughness and higher performance.

Delta’s DFC-50 series constitutes the line of round FRP bottle shape cooling towers, which are highly acceptable in every kind of industry.