Daily Archives: June 13, 2026

When to Choose EDPM Gasket in plate heat Exchanger? when to choose an EPDM (Ethylene Propylene Diene Monomer) Gasket for a plate heat exchanger. The decision is primarily driven by the presence of hot water, steam, alkalis, or the need for weather resistance. The Primary Rule of Thumb Choose an EPDM Gasket when the heat...

When to Choose NBR Gasket for plate heat exchanger? hen to choose an NBR (Nitrile) Gasket for a plate heat exchanger. The decision is primarily driven by the presence of oils, fats, or certain hydrocarbons in the fluid. The Primary Rule of Thumb Choose an NBR Gasket when the heat exchanger is used with oil-based...

Suitable material for plate heat exchanger used in Sea Shore Area?  Selecting the right material for a plate heat exchanger in a sea shore (coastal) area is critical due to one primary enemy: Chloride-Induced Corrosion. The salty, humid air is rich in chloride ions, which cause pitting and crevice corrosion, especially in stainless...

Material of Construction of Plate heat exchanger? The Materials of Construction (MOC) for a plate heat exchanger are critical to its performance, longevity, and cost. The selection is primarily driven by the need to resist corrosion from the process fluids, while also considering pressure, temperature, and hygiene requirements. The main...