Tags: cooling tower sprinkler assembly

  • Tag:

Close The Loop On Clean Cooling Water

Close The Loop On Clean Cooling Water   A plastics molding plant runs on more than electricity—it runs on water. Clean water. Lots of it. Consider even a small plant with three 165-ton and three 120-ton hydraulic injection presses. Each typically requires a continuous supply of 100 gal/min to cool the hydraulic system and the […]

Skid Mounted Cooling Tower

SKID MOUNTED COOLING TOWER Skid Mounted Cooling Tower is a complete set of cooling materials  such as Cooling Tower, Pump, Pipe work with connections, Water Treatment system, Electrical system mounted on a single base frame. This entire setup can be taken any where and it will ready to use by just connecting it to your […]

Wet Cooling Tower

Efficient technology for high-performance solutions                    Wet cooling offers an outstanding performance by taking full advantage of the ambient air humidity. Wet cooling, also called evaporative cooling, enables to obtain a re-cooled water temperature at least 20°C lower as compared to a radiator. As turbine output...

Field Erected Pultruded Frp Cooling Towers

Field Erected Pultruded FRP Cooling Towers Tipo Heat Exchangers made of Pultruded Fiberglass are the best solution in Worst Industrial environment. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardware. Pultruded Fiberglass Reinforced Polyester ( FRP ) is becoming...

Cooling Tower Sprinklers

Cooling Tower Sprinklers We manufacturer and supply kinds of Aluminium alloy sprinkler head and PVC alloy sprinkler head We have size of aluminium alloy sprinkler head is from 2″ to 12″ with 4 way sprinkler; these are Good quality, reliable in use. Sprinkler Assembly The sprinkler assembly is constructed of 100% non corrosive material. Mounted...