Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers-Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Adiabatic Wheel Heat Exchanger

Steam Condenser Manufacturer in India

Most unfired heat exchangers, operating with fluids that do not change phase, are of baffled shell-and-tube design, by which is meant that one of the fluids flows within straight or hairpin-bent tubes, whereas the other flow between and around those tubes, within an ah-confining shell, being guided in its path by baffles. These baffles serve...

Marine oil cooler Manufacturer in India

Plain tubes The most common arrangement is for one fluid to flow within straight or curved tubes of circular cross section, while a second fluid washes the outside of these tubes in a longitudinal, perpendicular, or oblique direction. The interface is thus represented by a tube wall, and contact is indirect. The tubes may, of […]

Condenser Manufacturer in India

In a large proportion of the heat exchangers encountered in practice, each fluid stream leaves in the same phase state as that in which it entered (a gas leaves as a gas, a liquid as a liquid). The result is that, as heat is transferred from the hotter fluid to the cooler one, the former […]

Thermic Fluid Cooler Manufacturer in India

Heat transfer is an interaction that occurs between materials by reason of the temperature difference between them. It is the most common type of interaction in heat exchange equipment Heat transfer between the streams is usually affected indirectly: the streams are separated by a solid material, such as a metal tube wall or plate, or […]

Lube oil cooler Manufacturer in India

The idealized flow configurations described above are all particular examples of what may be called multiple flows in interpenetrating continua, of which the characteristics are as follows: The individual streams come into thermal con tact with one another within the heat exchanger volume, and suffer consequential changes of temperature

Oil Cooler Manufacturer in India

Parallel-flow and counter-flow features may be combined within the same exchanger, as when tubes double back, once or more, within a single shell; and the same effect can be achieved, with straight tubes, by the provision of suitably subdivided headers. The U-tube, or hairpin arrangement has the advantage of easy construction because only one end...

Shell and Tube Heat Exchanger Manufacturer in India

In a cross-flow exchanger, the two streams flow at right angles to each other. For example, stream 1 might flow through a set of tubes, arranged in a bank, whereas stream 2 might thread its way through the spaces between the tubes in a direction generally at right angles to the tube axes.

Heat Exchanger Manufacturer in India

Heat exchangers transfer heat between two or more streams of fluid that flow through the apparatus. A major characteristic of heat exchanger design is the relative flow configuration, which is the set of geometric relationships between the streams. Counter flow Heat Exchanger In a counter-flow heat exchanger, the two fluids flow parallel to each...

Molasses Cooling System in Tamil Nadu

Factors responsible for the spontaneous combustion of molasses: In the case of certain factories when the low-grade massecuite are boiled at a little high temperature. T he certain ingredients of molasses are overheated & thus causing higher carbon content. After centrifuge the final molasses is sent to storage tanks with high temperature means...

Molasses Cooling System in South Africa

Molasses deterioration is a common phenomenon during storage in the tanks. Molasses has a tendency to undergo rapid destruction & ultimately leading to know about spontaneous combustion. The phenomenon of spontaneous combustion occurs purely by virtue of certain chemical reactions. Basically, it is an “exothermic reaction”. This...

Molasses Cooling System in Brazil

Key Considerations in Molasses Cooling: Molasses is a viscous fluid, and its viscosity changes significantly with temperature. This impacts the design and efficiency of cooling systems.  Maintaining the right temperature is crucial for both quality and process requirements.  The amount of heat required to raise or lower the...

Molasses Cooling System in India

Types of Molasses Coolers :Finned Tube Coolers These coolers use tubes with fins to increase the surface area for heat transfer, enhancing the cooling efficiency.  Plate-type coolers offer advantages like compactness and easy cleaning, making them a practical option.  These systems utilize the principle of evaporation to lower the...

Molasses Cooler Manufacturer in Chennai

Why cool molasses? Molasses contains sugars that can degrade and lose their fermentable properties if stored at high temperatures. Cooling helps to minimize these losses. Cooling reduces the risk of microbial growth and unwanted chemical reactions that can lead to spoilage and changes in molasses properties. In ethanol production, cooling is...

Molasses Cooler Manufacturer in Tamil Nadu

A “molasses cooler” refers to a system or device designed to lower the temperature of molasses, a viscous by product of sugar production. Cooling is important for maintaining the quality and preventing degradation of molasses during storage. Various types of molasses coolers exist, including those utilizing finned tubes, plate heat...

Molasses Cooler Manufacturer in Australia

• Duplex type Molasses Cooler • Liquid to Liquid • Horizontal/Vertical shape • Tiny coolers with cover & multi bolt system • Easy to clean • Low maintenance & highly efficient • Minimum head loss • Direct installation without disturbing existing arrangement • Long Life

Molasses Cooler Manufacturer in South Africa

Process of Cooling the Molasses: Tubular molasses coolers will have more number of tiny coolers with single pass for molasses and cooling water. Molasses will pass through the tubes whereas cooling water shall pass outside of the tubes. The cooling water and molasses will travel in counter current direction and required cooling can be achieved....

Molasses Cooler Manufacturer in Brazil

Aim of Molasses Cooling To maintain proper conditions for storage of molasses i.e., both qualitative and quantitative losses are to be avoided. As from commercial angle molasses storage has vital importance in view of its revenue earning potential. The effect of non-sucrose in the process is therefore an important factor in determining the quantity...

Molasses Cooler Manufacturer in India

Molasses is a viscous by product, principally obtained from the refining of sugarcane or sugar beet juice into sugar. Molasses varies in the amount of sugar, the method of extraction, and the age of the plant. Sugarcane molasses is usually used to sweeten and flavour foods. Molasses is a major constituent of fine commercial brown […]

Heat Exchanger Manufacturer in Libya

Spiral tube type heat exchangers are fabricated from coiled tubing. In some cases the tubing is installed inside a fabricated bundle to provide a compact stand alone heat exchanger. These exchangers are used primarily for small services such as pump seal fluid and sample coolers. Advantages

Heat Exchanger Manufacturer in Lebanon

Spiral plate heat exchangers are fabricated from two metal plates that are wound around each other. One process fluid stream enters the exchanger at the centre and flows outwards while the second fluid enters on the outside and flows inward. This creates almost a true counter current flow. Advantages Typical Applications

Heat Exchanger Manufacturer in Kuwait

Advantages Very compact design High heat transfer coefficients (2 – 4 times shell & tube designs) Expandable by adding plates Ease of maintenance Plates manufactured in many alloys All connections are at one end of the exchanger Good temperature approaches Fluid residence time is very short No dead spots Leakage (if it should occur) is...

Heat Exchanger Manufacturer in Egypt

A plate and frame heat exchanger is a compact heat exchanger where thin corrugated plates are stacked in contact with each other, and the two fluids flow separately along adjacent channels in the corrugation. The closure of the stacked plates may be by clamped gaskets, brazed (usually copper brazed stainless steel), or welded (stainless steel,...

Heat Exchanger Manufacturer in United Arab Emirates

The hairpin heat exchanger design is similar to that of double pipe heat exchangers with multiple tubes inside one shell. The design provides the flexibility of a U-tube design with an extended shell length that improves the exchanger’s ability to achieve close temperature approaches.   Advantages Good counter current or co-current flow –...

Heat Exchanger Manufacturer in Saudi Arabia

Double pipe heat exchangers are the simplest of all types. They are fabricated from two pieces of pipe – one inside the other. One fluid flows through the inner pipe while the second fluid flows through the annulus between the pipes Advantages •Inexpensive •True counter current or co-current flow •Easily designed for high pressure service...

Heat Exchanger Manufacturer in Djibouti

Shell and tube heat exchanger The principle components are: •shell •shell cover •tubes •channel •channel cover •tube sheet •baffles, and •nozzles Other components include tie-rods and spacers, pass partition plates (channel partitions), impingement plates, longitudinal baffles, sealing strips, and supports

Heat Exchanger Manufacturer in Qatar

Shell and tube heat exchangers have the following advantages:

Heat Exchanger Manufacturer in Oman

Shell and tube heat exchangers are known as the work-horse of the chemical process industry and represent the most widely used vehicle for transfer of heat in industrial applications. In essence, a shell and tube exchanger is a pressure vessel with many tubes inside of it. One process fluids flows through the tubes of the […]

Heat Exchanger Manufacturer in Iraq

There are several different styles of heat exchanger equipment in common use. These include: Other types of heat transfer equipment not discussed here are: By far the most common is the shell and tube design. However, other styles are often suitable or even preferable in specific applications.

Heat Exchanger Manufacturer in Bahrain

If air-cooling proves sufficient for much of the running time (such as for an aero-engine in flight, or a motorcycle in motion), then oil cooling is an ideal way to cope with those times when extra cooling is needed (such as an aero-engine taxiing before take-off, or a motorcycle in a city traffic jam). But […]

Heat Exchanger Manufacturer in Kuwait

Oil cooling is commonly used to cool high-performance motorcycle engines that are not liquid-cooled. Typically, the cylinder barrel remains air-cooled in the traditional motorcycle fashion, but the cylinder head benefits from additional cooling. As there is already an oil circulation system available for lubrication, this oil is...

Oil Cooler Manufacturer in Saudi Arabia

Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heat-exchanger, typically a type of radiator known as an oil cooler. The cooled oil flows back into the hot object […]

Oil Cooler Manufacturer in UAE

The Oil Cooler heat exchangers are most suitable for clean water low in lime, for example with a closed cooling circuit. Our PHE, oil-water cooler is provided with painting appropriate for marine applications (CDP + powder painting). Applications are as follows: It is possible to use other media, for example oil, water glycol, water, refrigerants,...

Water Cooled oil Cooler Manufacturer in India

The oil cooler is arranged in the circulating oil circuit of the lubrication system. Full-flow (also known as water-cooled oil cooler) is actually a liquid-liquid heat exchanger. The heat is oil and the coolant is water. Typically, the oil in this heat exchanger enters the tube and the water enters the shell.   Oil/water coolers […]

Tube oil Cooler Manufacturer in India

Material of Construction for Lube Oil Coolers is as follows Shell: Carbon Steel, SA106 Gr.B, IS 3589 ERW, SS 304 or SS 316 Tubes: SS 304, SS 316, Admiralty Brass, Copper, CuNi 90/10, CuNi 70/30 Tube sheet: IS 2062 Gr.B, SA 516 Gr.70, Naval Brass, AB-2, SS 304, SS 316 Baffles: Brass, Carbon Steel, SS […]

Shell and Tube oil Cooler Manufacturer in India

shell and tube heat exchangers offer various benefits such as versatility, durability, compact size, and cost-effectiveness. As a result, these heat exchangers are widely used in industries such as oil and gas, chemical processing, food and beverage, and power generation

Oil Cooler Manufacturer in India

An oil cooler is a separate, smaller radiator to an engine’s main radiator, which maintains an oil supply at a consistent, optimal temperature. Its purpose is to cool the oil passing through the coils, thus improving the engine and the transmission’s lifetime. They are situated in front of an engine’s cooling system.

Shell and Tube Heat Exchanger Manufacturer in Saudi Arabia

The three most common types of shell-and-tube exchangers are (1) fixed tube sheet design, (2) U-tube design, and  (3) floating-head type.    In all three types, the front-end head is stationary while the rear-end head can be either stationary or floating , depending on the thermal stresses in the shell, tube, or tube sheet, due...

Heat Exchanger Manufacturer in Saudi Arabia

 A heat exchanger consists of heat transfer elements such as a core or matrix containing the heat transfer surface, and fluid distribution elements such as headers, manifolds, tanks, inlet and outlet nozzles or pipes, or seals. Usually, there are no moving parts in a heat exchanger; however, there are exceptions, such as a rotary regenerative...

Shell and Tube Heat Exchanger Manufacturer in UAE

SHELL AND TUBE HEAT EXCHANGERS are the most commonly used heat exchangers in oil refineries and other large chemical processes.are used when a process requires large amounts of fluid to be heated or cooled.provide transfer of heat efficiently.use baffles on the shell-side fluid to accomplished mixing or turbulence.

Heat Exchanger Manufacturer in UAE

A heat exchanger is a device that is used to transfer thermal energy (enthalpy) between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at different temperatures and in thermal contact. In heat exchangers, there are usually no external heat and work interactions. Typical applications involve...

Regenerator Heat Exchanger Manufacturer in India

A regenerative heat exchanger, or regenerator, is a type of heat exchanger where heat from a hot fluid is stored in a thermal storage medium and then transferred to a cold fluid. This is achieved by having the hot and cold fluids alternately pass through the same channels, washing the same surface area. Unlike recuperative heat...

Tubular Heat Exchanger Manufacturer in India

A tubular exchanger is a type of heat exchanger with tubes encompassed in a shell. It is a very common device in industries where the focus is recovering heat from gas or liquids. The principle of the shell and tube heat exchanger is based on a bundle of tubes that is arranged vertically or horizontally […]

Flue gas Cooler Manufacturer in India

A flue gas cooler is a heat exchanger that lowers the temperature of flue gas, which is the exhaust gas from combustion processes, before it is released into the atmosphere. This is often done to recover waste heat, reduce emissions, or prepare the flue gas for further treatment.         Here’s a more […]

Recuperator Manufacturer in India

A recuperator is a specialized type of heat exchanger that recovers waste heat from exhaust gases or streams and transfers it to incoming gases or air streams, effectively preheating them. This process significantly improves the energy efficiency of various systems by reducing fuel consumption and lowering energy costs. Recuperators are commonly...

Syngas Dehumidifier Manufacturer in India

A syngas dehumidifier removes water vapor from syngas (synthesis gas) to improve its quality and prevent issues in downstream processes like power generation or chemical synthesis. It’s crucial for removing moisture which can cause corrosion, reduced efficiency, and operational problems in systems using syngas.   What is Syngas? Syngas...

Biogas Dehumidifier Manufacturer in India

Biogas Dehumidification System (BDS) reduces biogas temperatures from around 40ºC to approximately 5-7ºC, condensing more than 90% of the water volume. It works via a chiller system which supplies a coolant that is transferred to heat exchangers. Biogas flows on the product side of the exchanger, while the coolant flows on the service side. More...

Shell and Tube Heat Exchanger Manufacturer in India

Shell and tube heat exchanger Main parts STHE accounted for 85% of new exchangers supplied to oil-refining, chemical, petrochemical and power companies. Why? •Can be designed for almost any duty with a very wide range of temperatures and pressures •Can be built in many materials •Many suppliers •Repair can be by non-specialists •Design...

Heat Exchanger Manufacturer in India

A heat exchanger can be defined as any device that transfers heat from one fluid to another or from or to a fluid and the environment. They are specifically designed for the efficient transfer of heat from one fluid to another fluid over a solid surface They have the function to transfer heat as efficiently […]

Dry Cooling Tower Manufacturer in India

Adiabatic cooling systems have proven to be flexible enough to have established them as a crucial solution in various sectors, especially situations that demand precise temperature control. Waterman Engineers Australia designed their adiabatic coolers with the tight specifications of data centres, manufacturing, food processing, and HVAC industries...

Dry Cooling Tower Manufacturer in India

Ø Generally operating cost for Air Cooled Heat Exchanger (ACHE) is less than the same of water-cooled heat exchanger (WCHE). Operating cost of WCHE includes cost of make-up water for the cooling water, power required for the cooling tower fans and for the circulating pump, cooling tower maintenance, etc. while operating cost of ACHE includes...
1 … 7 8 9 10