Daily Archives: October 24, 2025

Common Applications of induced draft Air cooled Heat Exchanger Induced Draft Air Coolers are preferred in a wide range of industries, especially where precise temperature control and minimal recirculation are critical:

Advantages of Induced Draft Design Advantage Explanation Better Air Distribution The plenum chamber helps create a more uniform airflow across the entire tube bundle face, improving heat transfer efficiency. Reduced Hot Air Recirculation Because the fan discharges the hot air vertically at a high velocity, it is less likely to be sucked back into...

Induced Draft Air-Cooled Heat Exchanger induced Draft Air-Cooled Heat Exchanger (ID Fan ACE) in detail. This is a common type of heat exchanger used in industrial applications to cool a process fluid (like water, oil, or a process stream) using air. The Core Concept: “Induced Draft” The key differentiator is in the...

Types of Fins used in Finned tube? Fins are primarily categorized by how they are attached to the base tube, which determines their mechanical strength, thermal performance, and suitable applications. 1. Extruded Fins / Integral Fins This is considered the premium, high-performance option. Advantages: 2. Embedded Fins / Tension-Wrapped Fins A very...

Use of fins in Finned tube? The use of fins in a finned tube is a fundamental aspect of heat exchanger design, especially when one fluid is much harder to heat or cool than the other. Here’s a detailed explanation of why fins are used, how they work, and the different types available. The Core […]