Square Shape FRP Cooling Towers Manufacturers Coimbatore

The Square Shape Cooling Tower is of the design: Vertical Induced Draft Counter Flow, with a uniform distribution of water and an optimal transfer of heat. These are used by all large industries to cool the water that has undergone recycling.

The installation of these products can be done independent of the direction of wind. Square Shape Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature.

Square shape cooling tower

Square Shape Cooling Towers Capacities

  • Square cooling tower gives 100% cooling efficiencies
  • Give good appearance flow rate from 5 M3/Hr To 550 M3/Hr gives differences in temperature 4°C To30 °C
  • Availability of Capacities from 5 TR T0 600 TR in single cell

Square Shape Cooling Towers Applications

  • Glass Mfg. Plant
  • Herbal,Aromatics & extraction plants
  • Industries heat process
  • Oil refineries
  • Plastic injustion moulding m/c
  • PVC pipes mfg.plant
  • Soap / Cosmetic mfg. industries
  • Steel factory and foundry
  • Aluminium die casting m/c
  • Air compressors
  • A/C plant & cold rooms
  • Blow moulding M/c
  • Chemical industries
  • Dairy,Citrus and other food processing industries
  • Distilleries and Breweries plants
  • Diesel / Gas Gensets & Megawatt Projects

Square Shape Cooling Towers Features

  • All structural in HDG Steel
  • All joints fastened with SS fasteners
  • PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm
  • Adjustable pitch axial flow, dynamically balanced aluminium fans
  • The design incorporate the static spray nozzle distribution to atomize water in to a mist state and ensure uniformity in water dispersion and are easy to maintain even during the tower operations
  • Our cooling Tower are designed for multi-cell construction, thus offering better flexibility in tower selection and operation.
  • Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  • Uniformity in water dispersion through non – clog nozzles
  • Capacities 10TR to 1500TR , in single cell Water flow 5 m3/h to 1000 m3/h, in single cell
  • Delta T (Temperature drop) 4°C to 20°C, in single cell
  • TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft
  • The tower is reassembled in the factory, knocked down into some unit, transported to the job site, and reassembled into the final shape. The quality is thus stable. The transport and set-up is easy and quickly.