Blog

                                    Split Unit Chillers

Introduction

When we are faced with an application where a water cooled chiller is not acceptable but poor ventilation prohibits the dissipation of heat from a standard air cooled chiller we look to our line of split unit chillers.

Our split unit chillers come in two pieces

  1. The evaporator and
  2. compressor

section which is installed indoors and the condenser section which is installed outdoors. We offer our split unit chillers from 1 ton (12,000 BTU cooling capacity) up to 60 ton (720,000 BTU cooling capacity).

Split Unit Chiller Key Features

  • ETL listed
  • Remote condenser section
  • Microprocessor Controller
  • Suction accumulator
  • Water flow switch

applications of Split Unit Chillers:

standard and custom units have been used for applications in all industries, notably:

  • Dynamo-meters
  • Presses
  • Mining
  • Injection Molding
  • Extrusion
  • Blow Molding
  • Laser Cutting
  • Welding
  • Optics
  • High Altitude
  • MRI Cooling
  • Linear Accelerator Cooling
  • Medical Chillers
  • Military
  • Chemical & Pharmaceutical
  • Breweries, Wineries, Food Processing
  • Jacketed Vessels
  • Laboratories
  • Machine Tools
  • Printers
  • Hydraulic Cooling
  • Data Center Cooling

Features:

  • ETL listed
  • Remote condenser section
  • Microprocessor Controller
  • Industrial duty system process pump
  • Stainless Steel, brazed plate evaporator with insulation, and secured in a steel bracket (Models ACCSTP160 thru ACCSTP225 use shell & tube exchanger)
  • Scroll compressor with crankcase heater
  • Suction accumulator
  • Water flow switch
  • Hot gas by-pass capacity control
  • 24V control transformer
  • Direct drive condenser fan motor
  • Rust resistant, high CFM, aluminum condenser fan blade
  • Condenser(s): copper tube / aluminum fin
  • Compressor motor contactor
  • Condenser motor and control circuit fusing
  • “Hard start kit” (single phase units only)
  • Painted, galvanized sheet metal cabinet
  • Insulation on all water and refrigerant lines
  • Liquid line drier, sight glass, solenoid, TEV
  • Full refrigerant charge from factory
  • Stainless Steel storage tank with insulation (Optional)
  • Fused Stainless Steel re-circulation pump for tank operation with ball valve and cleanable strainer (Optional)
  • Tank pressure relief valve, vent and drain connections (Optional)

 

Technical Specification:

  1. Cooling capacity: 6.6 KW
  2. 3-speed motor
  3. hoses, hydraulic and electrical connection
  4. Fins adjustable air outlet 45/90 °
  5. 30 mt. Max distance between indoor and outdoor units
  6. Operation range unit: 10-30 ° C
  7. Operation range unit estarna: 10-40 ° C
  8. Quiet Operation
  9. High and low pressure
  10. Cooling capacity (26 ° C 55% IN, OUT 30 ° C): 6.7 kW
  11. Cooling capacity (26 ° C 55% IN, 30 ° C OUT): 22900 BTU / h
  12. Power consumption (26 ° C 55% IN, OUT 30 ° C): 2600 W
  13. Current consumption (26 ° C 55% IN, OUT 30 ° C): 12 A
  14. Indoor airflow as a function of speed:
  15. – Maximum speed of 1500 cm / h
  16. – Average speed 1400 cm / h
  17. – Low speed 1150 cm / h
  18. Airflow outdoor unit 2100 cm / h
  19. Refrigerant R407c / 730 g
  20. High efficiency compressor Rotary
  21. Sound pressure level (at 3 mts in free field) at average speed 49 dB (A)
  22. Maximum distance between the 2 units: 30 m
  23. Interior Dimensions WxDxH mm: 815x360x1030
  24. External dimensions WxDxH mm: 582x360x460
  25. Indoor unit weight 86 Kg
  26. Outdoor unit weight 16,5 Kg
  27. Power supply: 230/1/50
Images

Split Unit Chillers:

Image result for split unit chillers

Image result for split unit chillers