Dry Cooling Towers
Dry Cooling Towers are nothing but type radiator Cooling. All the heat Transfer areas can be easily approach, the periodical cleaning and maintenance will be very easy and also the replacement period is also more when comparing with other cooling Tower system. Oil/water is cooled by a single heat Exchanger system, cost energy cooling water and maintenance spent can be reduced, various hot media can be cooled simultaneously by the same fan using parts. The tubes are wounded with integral Aluminium or copper wire type fins for increasing the Heat Transfer areas.
Process Engine water or oil is directly taken from the system to Dry Cooling Tower. So the mid-Heat Exchanger is not required.
We fabricate a wide range of Dry Cooling Tower, which are also known as heat removal device. This cooling tower is used to transfer process waste heat to the atmosphere.Our range of dry cooling tower comprises following important
Dry Cooling towers Features:
No water consumption
Avoid water related scaling problem
Eliminate deterioration of tower
Long Working Life
Advantages of Dry Cooling towers : –
Dry Cooling Tower is functioning with Air cooling Technology, there is no needs of excess water evaporative and make up is required to operate the cooling Tower.
Dry Cooling Towers Technical Functions : –
Warm water from the heat source is pumped to the water distribution system at the top of the tower
Water is distributed over the wet deck fill by means of large orifice holes of Spray nozzles
air is drawn in through the air inlet louvers at the base of the tower and travels upward through the wet deck fill opposite the tower flow
A small portion of the water is evaporated which removes the heat from the remaining water
Warm moist air is drawn to the top of the cooling tower by the fan and discharged to the atmosphere
Cool water drains to the basin at the bottom of the tower and is returned to the heat source