Cooling Tower Gearbox

The Cooling Tower Demands Different Operational Requirements From A Gearbox, Tipo Cooling Tower Into The Power Transmission Industry For More Than 3 Decades , Understands And Has Grown Upon To Provide As The Demand.

Cooling Tower Gearbox Product Specifications : –

• Case Hardened And Lapped Steel Spiral Bevel Gearboxes Are Provided For Torque Transmission Between The Right Angle Shaft.
• Our Cooling Tower Gearboxes Have A Unicast Case, Three-Point Foundation With Pump Less Lubrication, Which Is Unique In Design
• It Has A Combination Of Labyrinth Double Oil Seal Arrangement At Fan End With Double Oil Seal At Motor End.
• Taper/Cylindrical/Spherical Roller Baerings Are Used.
• The Standard Direction Of Rotation Is “Clockwise” At Both The Input/Output Shafts When Viewed Onto Respective Shaft End.

Cooling Tower Gearbox Technical Specifications : –

• Cooling Tower PartsPower Range : Upto 600kW
• Reduction Ratio : Upto 15.4 : 1
• Sizes : 140 – 450mm Centre Distance
• Reduction Stages : Single/Double
• Service Factor : Minimum 2.0 ( As Per AGMA / CTI Recommendation )
• Special Fabrication As Per Custom Built Available

Drive Shafts

• The Torque Transmission Required To Rotate The Fan ( Of Cooling Tower ) ,The Connecting Link Between The Input Shaft Of Gearbox And The Electric Motor Is Provided By The Drive Shafts.
  Helps Achieve Optimal Performance.
• Cost Effective – The Foot Patterns Of Gear Housing Are Identical – Support Of Tower Gear Drive And The Fan Pitch Adjustments Unnecessary .

Warranty Terms :

The Cooling Tower Gearboxes Provided By Tipo Cooling Tower Have A Guaranty Of 12 Months After The Installation Against Any Defect In Material Or Workmanship When Operated Under The Appropriate Conditions .

Rotational Direction : –

• Clockwise Rotation Of Both Shafts – Under Normal Conditions .
• Occasionally The Counterclockwise Rotation Of Both The Shafts Is Permitted
• If The Primary Rotational Direction Requirement Is Counterclockwise / Shaft Need To Rotation In Opposite Directions – Provided Upon Order.

Output Shaft : –

Cylindrical Output Shaft / Tapered Output Shaft

Applications : –

• Cooling Towers
• Heat Exchangers

Industry : –

• Cement
• Paper
• Solvent Extraction
• Sugar
• Steel
• Power Plants