Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Copper Tube Heat Exchangers

Introduction:

Copper Tube Heat Exchangers are devices that transfer heat in order to achieve desired heating or cooling. An important design aspect of heat exchanger technology is the selection of appropriate materials to conduct and transfer heat fast and efficiently. Copper tube heat exchangers are many desirable properties for thermally efficient and durable heat exchangers. First and foremost, copper is an excellent conductor of heat. This means that copper’s high thermal conductivity allows heat to pass through it quickly. Other desirable properties of copper in heat exchangers include its corrosion resistance, bio fouling resistance, maximum allowable stress and internal pressure, creep rupture strength, fatigue strength, hardness, thermal expansion, specific heat, antimicrobial properties, tensile strength, yield strength, high melting point, alloy ability, ease of fabrication, and ease of joining.

Process Of Copper Tube Heat Exchangers:

Copper tube heat exchangers alloy tube and pipes, such as Al-brass, 90-10 Cu-Ni and others are widely used in tubular heat exchangers and piping systems. The medium flowing through the tubes is in general seawater, brackish water or fresh water. Under unfavourable conditions chloride-containing water can initiate corrosion on tube and plate material, particularly if the water is polluted or contains solid particles. In such cases suitable counter-measures should be applied. these tubes are made with non-toxic, low temperature allow based on the cunning system, it can be brazed in the same vacuum and controlled atmosphere furnaces used for aluminum radiators and at the same temperature .

Image:

https://www.tipoheatexchangers.com/about-tipo-heat-exchangers-and-cooling-tower-manufactures/

Characteristics

  1. Good wear resistance;
  2. Excellent corrosion resistance;
  3. High intensity;
  4. Hot Forging performance;
  5. Good cutting performance;
  6. Self-lubricating performance.

Features Of Copper Tube Heat Exchangers

  1. The unit is designed in mobile for easy use during generator load testing, electrical and marine load testing.
  2. Use low heat created heating element. In order to minimize the heating element to create so much heat, we design the higher voltage for heating element than what is rated voltage to which the total weight is sacrifice. However, this unit can be used continuously even inside assembly plant because the said heating element is U type element with cooling fins.
  3. The series of models provide resistive load from 0 to maximum load, convenient to use and easy to operate with step load ban variable adjustment.
  4. The digital meter displays the line voltage, line ampere, frequency, power factor(optional) and power measurements.
  5. Digital metering
  6. Large load capacity
  7. Durable, Sturdy, High performance.

Applications Of Copper Tube Heat Exchangers:

  1. Air conditioner & refrigeration
  2. Handling of Water tube service & distribution
  3. Handling of Fire Protection
  4. Handling of Solar, Fuel/Fuel Oil
  5. Handling of Natural Gas
  6. Handling of Liquefied Petroleum (LP) Gas
  7. Handling of HVAC, Drain, Vent Piping
  8. Re-drawing Use
  9. Heat Exchange Use
  10. Sanitary waste water drainage
  11. Wet central heating systems
  12. Under-floor heating