Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Square Shape Cooling Tower

The Square Shape Cooling Tower is of the design:

-Vertical Induced Draft Counter Flow, with a uniform distribution of water and an optimal transfer of heat
-These are used by all large industries to cool the water that has undergone recycling
-The installation of these products can be done independent of the direction of wind
-Square Shape Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature

Applications

  1. Aluminium die casting m/c
  2. Air compressors
  3. A/C plant & cold rooms
  4. Blow moulding M/c
  5. Chemical industries
  6. Dairy,Citrus and other food processing industries
  7. Distilleries and Breweries plants
  8. Diesel / Gas Gensets & Megawatt Projects
  9. Glass Mfg. Plant
  10. Herbal,Aromatics & extraction plants
  11. Industries heat process
  12. Oil refineries
  13. Plastic injustion moulding m/c
  14. PVC pipes mfg.plant
  15. Soap / Cosmetic mfg. industries
  16. Steel factory and foundry

SQUARE SHAPE COOLING TOWERS CAPACITIES:

  • Square cooling tower gives 100% cooling efficiencies
  • Give good appearance flow rate from 5 M3/Hr To 550 M3/Hr gives differences in temperature 4°C To30 °C
  • Availability of Capacities from 5 TR T0 600 TR in single cell

SQUARE SHAPE COOLING TOWERS FEATURES:

  1. All structural in HDG Steel
  2. PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm
  3. TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft
  4. Adjustable pitch axial flow, dynamically balanced aluminium fans
  5. Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  6. All joints fastened with SS fasteners
  7. Uniformity in water dispersion through non – clog nozzles
  8. Capacities 10TR to 1500TR , in single cell
  9. Water flow 5 m3/h to 1000 m3/h, in single cell
  10. Delta T (Temperature drop) 4°C to 20°C, in single cell
  11. The design incorporate the static spray nozzle distribution to atomize water in to a mist state and ensure uniformity in water dispersion and are easy to maintain even during the tower operations
  12. Our cooling Tower are designed for multi-cell construction, thus offering better flexibility in tower selection and operation.
  13. The tower is reassembled in the factory, knocked down into some unit, transported to the job site, and reassembled into the final shape.