Blog

Skid Mounted Cooling Towers

Skid Mounted Cooling Tower is a complete set of cooling materials such as Cooling Tower, Pump, Pipe work

with connections, Water Treatment system, Electrical system mounted on a single base frame. This entire

setup can be taken any where and it will ready to use by just connecting it to your system. Skid mounted

cooling tower is customizable according to the user requirements.

Cooling towers originated out of the development in the 19th century of condensers for use with the steam

engine. Condensers use relatively cool water, via various means, to condense the steam coming out of the

pistons or turbines. This reduces the back pressure, which in turn reduces the steam consumption, and thus

the fuel consumption, while at the same time increasing power and recycling boiler-water.

Cooling towers vary in size from small roof-top units to very large hyperboloid structures (as in the

adjacent image) that can be up to 200 metres (660 ft) tall and 100 metres (330 ft) in diameter, or

rectangular structures that can be over 40 metres (130 ft) tall and 80 metres (260 ft) long. The skid

mounted cooling towers are often associated with nuclear power plants, although they are also used to some

extent in some large chemical and other industrial plants. Although these large towers are very prominent,

the vast majority of cooling towers are much smaller, including many units installed on or near buildings

to discharge heat from air conditioning.

The engineering team at Tipo Heat Exchangers is ready to help you design the ideal cooling pumping package based on

your specific requirements.

Tipo Heat Exchangers has engineered cooling pumping packaged systems from cooling of large industrial electrical panels

to the cooling of process equipment in manufacturing, power generation and mining. This is accomplished

through the use of plate and frame exchangers, chillers, cooling towers, airflow radiators, and various

pumps to complete your cooling pumping package.

Cooling skids are used in the following applications :-

Very high horse-power VFD installations,

Complex Electrical & Electronics installation, such as SVC’s that require heat removal,

High speed electromagnetic motors and auxiliaries,

Magnetic adjustable speed drives,

Critical Industrial, mining or process industry applications.