Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Moisture and Oil Filter

Moisture and Oil Filter

A filter system to absorb and separate water and oil vapors from gases comprising a cylindrical container connectable in a supply line for said gases and containing at least one filter unit comprising a seamless cylindrical sleeve formed from textile material having a predetermined uniform porosity, the diameter of said sleeve being slightly greater than the inner diameter of said container so that when the filter unit is supported between porous supporting means within said sleeve the periphery of the sleeve will smoothly and tightly engage the inner surface of the container and thereby prevent channeling and bypassing of gases between the sleeve and the inner surface of the container during use.

Product Range :

                5 CFM to 500 CFM
                0.01 micron to 40 micron

Moisture and Oil-Filter Combination Kit helps your paint-spray equipment work its best by removing moisture and particulates.

  • Together remove 99% of contaminants
  • Each has 1/2″ NPT ports and handles up to 150 ps

Removing moisture, debris and oil aerosols before they get into your air tools is a smart idea for keeping your spray equipment working at top efficiency.

Bout Compressed Air Moisture and Oil Filters : –

Together, these moisture and oil separators will remove 99.9% of the contaminants that can ruin paint jobs and your painting equipment.

Coalescing-type oil separator filters particles as small as 0.3 microns, removing 99.9% of oil contaminants with only 1-psi pressure drop. Flow rate is 16 cfm.

Moisture separator ensures dry air to the gun and removes particulates down to 40 microns. Handles up to 115 cfm at 150 psi.

For best results, use both separators, connected in series.

Contents

Oil Separator
Moisture Separator

Accessories

20598 Replacement Filter Element for the Oil Separator
20595 Replacement Filter Element for the Moisture Separator

Application

Connect filters as close to air tool as possible. Air should first be routed through the moisture filter before going through the oil filter. The polycarbonate bowl can be washed with soap and water; do not use solvents.