Blog

download (12)

             Split Unit Chillers

Introduction:

When we are faced with an application where a water cooled chiller is not acceptable but poor ventilation prohibits the dissipation of heat from a standard air cooled chiller we look to our line of split unit chillers.

Our split unit chillers come in two pieces –

  • The evaporator, and
  • compressor

section which is installed indoors and the condenser section which is installed outdoors. We offer our split unit chillers from 1 ton (12,000 BTU cooling capacity) up to 60 ton (720,000 BTU cooling capacity).

Split Unit Chillers Key Features:

ETL listed
Remote condenser section
Microprocessor Controller
Suction accumulator
Water flow switch.

Applications of Split Unit Chillers:

standard and custom units have been used for applications in all industries, notably:

Dynamo-meters
Presses
Mining
Injection Molding
Extrusion
Blow Molding
Laser Cutting
Welding
Optics
High Altitude
MRI Cooling
Linear Accelerator Cooling
Medical Chillers
Military
Chemical & Pharmaceutical
Breweries, Wineries, Food Processing
Jacketed Vessels
Laboratories
Machine Tools
Printers
Hydraulic Cooling
Data Center Cooling
Features of Split Unit Chillers:
ETL listed
Remote condenser section
Microprocessor Controller
Industrial duty system process pump
Stainless Steel, brazed plate evaporator with insulation, and secured in a steel bracket (Models ACCSTP160 thru ACCSTP225 use shell & tube exchanger)
Scroll compressor with crankcase heater
Suction accumulator
Water flow switch
Hot gas by-pass capacity control
24V control transformer
Direct drive condenser fan motor
Rust resistant, high CFM, aluminum condenser fan blade
Condenser(s): copper tube / aluminum fin
Compressor motor contactor
Condenser motor and control circuit fusing
“Hard start kit” (single phase units only)
Painted, galvanized sheet metal cabinet
Insulation on all water and refrigerant lines
Liquid line drier, sight glass, solenoid, TEV
Full refrigerant charge from factory
Stainless Steel storage tank with insulation (Optional)
Fused Stainless Steel re-circulation pump for tank operation with ball valve and cleanable strainer (Optional)
Tank pressure relief valve, vent and drain connections (Optional)

Technical Specification:

Cooling capacity: 6.6 KW
3-speed motor
hoses, hydraulic and electrical connection
Fins adjustable air outlet 45/90 °
30 mt. Max distance between indoor and outdoor units
Operation range unit: 10-30 ° C
Operation range unit estarna: 10-40 ° C
Quiet Operation
High and low pressure
Cooling capacity (26 ° C 55% IN, OUT 30 ° C): 6.7 kW
Cooling capacity (26 ° C 55% IN, 30 ° C OUT): 22900 BTU / h
Power consumption (26 ° C 55% IN, OUT 30 ° C): 2600 W
Current consumption (26 ° C 55% IN, OUT 30 ° C): 12 A
Indoor airflow as a function of speed:
– Maximum speed of 1500 cm / h
– Average speed 1400 cm / h
– Low speed 1150 cm / h
Airflow outdoor unit 2100 cm / h
Refrigerant R407c / 730 g
High efficiency compressor Rotary
Sound pressure level (at 3 mts in free field) at average speed 49 dB (A)
Maximum distance between the 2 units: 30 m
Interior Dimensions WxDxH mm: 815x360x1030
External dimensions WxDxH mm: 582x360x460
Indoor unit weight 86 Kg
Outdoor unit weight 16,5 Kg
Power supply: 230/1/50

Images:
Split Unit Chillers
Split Unit Chillers