Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Mineral Water Plant

MINERAL WATER PLANT

 

 

World Latest Technologies of Process for Mineral Water ( Bottled Water ) Production from Different  Source  of water Like Bore Hole , Deep Well, River Water, Sea Water etc.

TECHNICAL DATA :
 
CHLORINE  DOSING SYSTEM: (CL2 )

Raw water may contain living micro-organisms and organics which are objectionable to R.O. Membrane as it may cause fouling to deteriorate the performance. Even water may contains ferrous which can be oxidized to ferric oxide  which is settle down in storage tank. We  have  offered a Hypo chlorite dosing system for this purpose. About 3-4 ppm of sodium hypo chlorite solution is dosed in raw water storage  tank. This reacts with water to form a hypo chlorite acids which acts as disinfecting agent.

For this purpose one no. of HDPE hypo chlorite solution preparation tank along with One nos. of dosing pumps are provided.  Required suction / discharge pipe work  in pvc construction is provided with isolation valves. Dosage rate is adjusted as per the actual requirement, which may very on case to case basis

RAW WATER STORAGE TANK  : (RWST)  

One No. of  Raw water is required in for storage of chlorinated water having appropriate capacity. The tank is fitted with PVC  pipe work & isolation valves and suitable type of level indicator.

PRESSURE SAND FILTER: (PSF)  

Raw Water is first filtered by filtration unit in series prior  feeding R.O.Plant. pressure Sand Filter Unit is provided for removal of suspended matters & turbidity from raw water. PSF Unit is a SS vertical Pressure Vessel. Internally, it is fitted with bottom collecting system. A uniform grades silica quartz sand is charged on the supporting media of pebbles and gravels. This unit is fitted with SS frontal pipe work and Multiport Valve externally. During service cycle water is passed in down ward direction through sand bed, thus entrapping suspended matter & turbid particles. Over a period of time, sand bed gets chocked due to suspended matters resulting higher pressure drop and lesser floe. At this stage filter bed need to be backwashed.