Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

FRP Box Shape Cooling Towers in Saudi Arabia

FRP Box Shape Cooling Towers:

FRP Box Shape Cooling Towers designed especially for an alternative to round model for selection to our buyers. The FRP Box shape Cooling Towers consists of Virgin Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency & directly driven fan & Motor with spray Nozzles ‘Minimum drift Losses. Hot dipped Galvanized hardware with rectangular casing body in elegant design. Box Shape FRP (Fibre glass Reinforced Plastic) Cooling Towers also called as Bottle Shape Cooling Towers. FRP Box shape cooling towers in main advantage is power saving. The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion.

Image:

http://FRP Box type cooling towers

Process:

FRP Box Shape Cooling Towers s/Rectangular shaped Cooling Towers that performs under induced draught counter flow principle for the operation. The hot water enters through hot water inlet that passes through perforated branch pipes, which distributes the water by the splash caps evenly. This water is spread over the heat exchange fills. Then, the water flows downward as a thin film through the fill in direct contact with ambient air moving upwards in a counter flow direction.
Water cooling is affected by heat transfer in the form of convention and evaporation. Drift eliminators are mounted above the water distribution, to prevent carryover of the droplets by the fan. Drift loss is controlled by the drift eliminator to less than 0.02 % of water in circulation. High flexibility is introduced by multi-cell cooling Towers that can be customized to meet individual cooling requirements and conditions. The design further assures a high level of availability.

Materials:

  1. Casing
    It has rust proof tough FRP bottle type design, which can withstand high wind velocity and vibrations. This model does not require any painting and is compact in design with long life.
  2. Filling
    Comes with a honeycomb designed rigid PVC, which has extended surface area. It assists in splitting air and water, which in turn enhances the contact time and heat transfer area through evaporation. Our PVC modules are vacuum formed and come with double edges, to provide highly efficient and robust packing. These modules are the heart of cooling tower.
  3. Fan
    The fan of the module is aerodynamically designed & has adjustable blade type axial. The flow fan is highly efficient & ensures large air flow at low static pressure with low noise levels.
  4. Motor
    The motor used is squirrel-cage TEFC induction motor, which comes with IP55 weather proof electric motor that is suitable for humid outdoor conditions.
  5. Distribution
    A special rotary aluminum alloy-sprinkler with sealed ball bearings is specifically designed to take care of radial and thrust loads rotating at 5 to 7 R.P.M & distributing water through PVC branch pipes. It uniformly sprays water on the PVC fills. SS-304 sprinklers are also available upon clients request.

Features:

  1. Compact in size
  2. Corrosion Resistant
  3. Light in weight
  4. Non-deteriorating
  5. Modular in design
  6. Easily Maintainable
  7. Lesser Make-Up
  8. Scientific Design
  9. Look Proof basin
  10. Power Saving
  11. Easy to Install
  12. Possible roof top Installation
  13. Durable in nature
  14. Efficient
  15. Prompt after Sales Service
  16. Interchangeable Spares